-Filter bag for AXYZ CNC router machine

-Skimming tool for CNC router

- Origin: UK

- Glass fuses are used to protect sensitive electronics where required.  The glass fuse holders will generally have a spare fuse in them.  Replace the spare fuse when it is used.  


Ceramic fuses are installed on the drive power board and are used to protect individual motor drives.
1.       Stepper drives are protected using 5 Amp ceramic fuses.
2.       Servo drives are protected using 10 Amp ceramic fuses

- Braking resistors are used to absorb the power generated by decelerating spindles.
- Braking resistors allow an inverter to stop spindles much faster and safer.

- Spindle plates are designed to mount the various sizes and types of spindles to the Z axis of the CNC machine.
- These plates ensure the spindle is mounted vertically and spaced correctly for all the machine options.
- The spindles can be adjusted vertically.

- The Electric Tangential Knife is a highly versatile tangential knife cutter that can fit a large variety of knife holders for many knife cutting applications.
- This cutter can be fitted on a knife ready machine.

- The A2MC Cooling Fan is a muffin style fan is installed into the A2MC controller enclosure.

- The FPGA Board is a high performance controller that controls the machine’s motor drives. It operates at 4.125 million 3 dimensional positions per second.
- Origin: UK

- The Mini ITX Power Supply provides power to the MiniITX PC that runs the A2MC controller.
- Origin: UK

- The F25 sensor is used to measure the length of tools on A2MC systems.
- It is also sometimes referred to as a tool tip sensor.
- Origin: UK

- Left Pressure Feet Bottoms are used to replace broken, cracked, worn out ones. They are adhered to the pressure foot assembly with silicon.
- This is suitable for use with the original style pressure foot. Not for use with High Capacity or 5Y.
- Origin: UK

- Right Pressure Feet Bottoms are used to replace broken, cracked, worn out ones. They are adhered to the pressure foot assembly with silicon.
- This is suitable for use with the original style pressure foot. Not for use with High Capacity or 5Y.
- Origin: UK

- The Donut is fastened to the bottom of either the left or right pressure foot. It has a 2” or 50mm hole in the bottom and is ideal when cutting large sized parts, maximizing the efficiency of the vacuum.
- This is suitable for use with the original style pressure foot. Not for use with High Capacity or 5Y.
- Origin: UK

- This plug is used to repair leaking vacuum deck extrusion.
- Origin: UK

-This plug is used to repair leaking vacuum deck extrusion.
-Origin: UK

-The 10 hp HSD Spindle is a high powered high speed spindle featuring automatic (or quick) change operation using IS030 tool holders. 

Ratings:

  • 7.5 kW (10 hp)
  • Maximum speed of 24000 RPM
  • Power factor of 0.8
  • Weight of 24.2 kg (53.5 lbs)

The 10 hp HSD is a 4 pole spindle.
- Origin: UK

Safety light curtains reliably and cost-effectively protect against access into hazardous points and areas.
This kit is designed for protection to cover one open side of your AXYZ CNC Router.
 
Includes:
Safety Light Curtain
Floor Posts
Safety Relay
A2MC Light Curtain Ready Kit

Note 1: A2MC R. 7 Control System Required
Note 2: Smartconsole Require

- This Plastic Nozzle Assembly is a replacement 18 inch (450 mm) wand for Unist misting system.
- Wands can be easily damaged. Consider maintaining at least one spare part to ensure that you do not lose production time.
- Origin: UK

- This Plastic Nozzle Assembly is a 24 inch (610 mm) replacement Unist misting system wand.