- The USB to RS485 converter box is used to communicate between a PC running Toolpath and an AMC machine controller.  This device plugs into a USB port on the PC and converts the communication signal to RS485 which can be then connected to the AMC controller. 

- The AMC connection board provides power to the machine’s drives, makes the connections to the drives and sensors, as well as providing power to the AMC itself.

- The AMC Flash Board fits on either AMC004G or AMC004H AMC controllers. This device holds both the operating system and the jobs on 4 Mbytes of memory.
- The availability of parts for these legacy systems is dwindling rapidly. While the AMC has proved to be a reliable component, the time to replace the control system is now. AXYZ can upgrade the majority of CNC machines to the latest A2MC controller which will bring you all the benefits of improved performance and advanced features. 

- The Zoning Modbus controller operates on the A2MC Modbus network and has several uses.
- It is used to operate either dual or triple vacuum manifolds.
- It is also used to operate vacuum hold down zones and pop up pins.

- For AXYZ CNC router using only

-The Heavy Duty Bridge Rectifier is recommended for systems with more than 4 stepper drives (multi head machines) as well as machines that have had problems with the bridge rectifiers failing.

- The newly constructed Phenolic Pressure Foot Donut is now blind (top-down) mounted.
- Our new blind mount donut replaces the old bottom-up design and fits all AXYZ High Capacity Pressure Feet.

- The Smouse R1 board is for use on the Smouse tool tip sensor.

-Skimming tool for CNC router

- Origin: UK

- Glass fuses are used to protect sensitive electronics where required.  The glass fuse holders will generally have a spare fuse in them.  Replace the spare fuse when it is used.  


Ceramic fuses are installed on the drive power board and are used to protect individual motor drives.
1.       Stepper drives are protected using 5 Amp ceramic fuses.
2.       Servo drives are protected using 10 Amp ceramic fuses

- Braking resistors are used to absorb the power generated by decelerating spindles.
- Braking resistors allow an inverter to stop spindles much faster and safer.

- The Electric Tangential Knife is a highly versatile tangential knife cutter that can fit a large variety of knife holders for many knife cutting applications.
- This cutter can be fitted on a knife ready machine.

- The A2MC Cooling Fan is a muffin style fan is installed into the A2MC controller enclosure.

- The FPGA Board is a high performance controller that controls the machine’s motor drives. It operates at 4.125 million 3 dimensional positions per second.
- Origin: UK

- The Mini ITX Power Supply provides power to the MiniITX PC that runs the A2MC controller.
- Origin: UK

- The F25 sensor is used to measure the length of tools on A2MC systems.
- It is also sometimes referred to as a tool tip sensor.
- Origin: UK

- Left Pressure Feet Bottoms are used to replace broken, cracked, worn out ones. They are adhered to the pressure foot assembly with silicon.
- This is suitable for use with the original style pressure foot. Not for use with High Capacity or 5Y.
- Origin: UK

- Right Pressure Feet Bottoms are used to replace broken, cracked, worn out ones. They are adhered to the pressure foot assembly with silicon.
- This is suitable for use with the original style pressure foot. Not for use with High Capacity or 5Y.
- Origin: UK

- The Donut is fastened to the bottom of either the left or right pressure foot. It has a 2” or 50mm hole in the bottom and is ideal when cutting large sized parts, maximizing the efficiency of the vacuum.
- This is suitable for use with the original style pressure foot. Not for use with High Capacity or 5Y.
- Origin: UK

- This plug is used to repair leaking vacuum deck extrusion.
- Origin: UK

-This plug is used to repair leaking vacuum deck extrusion.
-Origin: UK

-The cable fits a 10hp ELTE spindles.

-The 10 hp HSD Spindle is a high powered high speed spindle featuring automatic (or quick) change operation using IS030 tool holders. 

Ratings:

  • 7.5 kW (10 hp)
  • Maximum speed of 24000 RPM
  • Power factor of 0.8
  • Weight of 24.2 kg (53.5 lbs)

The 10 hp HSD is a 4 pole spindle.
- Origin: UK