- Origin: US

- Grease Nipples are added onto bearings to allow for proper greasing. Well greased bearings run better and smoother.
It is vital that you maintain your machine by regular greasing of the bearings and ball screws.

Grease Nipples (or fittings) can be damaged by getting plugged or simply broken off. Immediately replace damaged nipples as grease will be lost through the broken part.

- This sensor is fitted with a 3 pin Panduit header on approximately 2 m (6 ft) of cable.

- This sensor directly connects to sensor cabling.

- This sensor is fitted with a 3 pin Molex connector on approximately 100 mm (4 inches) of cable.

- The 3 Way Pneumatic Valve is generally used to control the machine’s pressure foot. There will be one valve for each pressure foot installed on the machine.

- For AXYZ CNC Router

- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to THK Linear Bearings.

- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to Star Linear Bearings.

- This is a replacement fan for Eurobox style control boxes. It includes the fan, bezel, and filter enclosure.

- Replacement Lexan door for a 7G ATC

- For AXYZ CNC router only 

- Standard length (6.625') tool cups for a 7G or 21G ATC system

- Replacement for the pneumatic plunger for 7G/21G ATC for when it is broken or stuck up or down.
- This SKU, 050491, has a product number that starts with 'NCMB125' on the product label. Please be sure to correctly identify this prior to ordering.

- The USB to RS485 converter box is used to communicate between a PC running Toolpath and an AMC machine controller.  This device plugs into a USB port on the PC and converts the communication signal to RS485 which can be then connected to the AMC controller. 

- The AMC connection board provides power to the machine’s drives, makes the connections to the drives and sensors, as well as providing power to the AMC itself.

- The AMC Flash Board fits on either AMC004G or AMC004H AMC controllers. This device holds both the operating system and the jobs on 4 Mbytes of memory.
- The availability of parts for these legacy systems is dwindling rapidly. While the AMC has proved to be a reliable component, the time to replace the control system is now. AXYZ can upgrade the majority of CNC machines to the latest A2MC controller which will bring you all the benefits of improved performance and advanced features. 

- The Zoning Modbus controller operates on the A2MC Modbus network and has several uses.
- It is used to operate either dual or triple vacuum manifolds.
- It is also used to operate vacuum hold down zones and pop up pins.

- Motor Overload Protectors are not used on the control panels but are installed on all contactors controlling pumps, drills, and other peripheral device motors. 
- These devices ensure that a motor does not overheat and start a fire; so it is vital the correct device is used and it is set properly.  Motor overload protectors are available in a number of sizes and “ranges”.
-The current range must be set to 25% higher than the rated motor current that is printed on the motor nameplate.
- Please note that if you are replacing an older contactor or overload to one of these new ones, both must be changed. 

-The Heavy Duty Bridge Rectifier is recommended for systems with more than 4 stepper drives (multi head machines) as well as machines that have had problems with the bridge rectifiers failing.

- The bridge rectifier supplies the power to an AMC machine’s stepper drives.
- This version plugs into the connection board. If this part has failed there is no power to the stepper drives.
- A more powerful bridge rectifier is available if you have a multi head machine or you are having problems with this part failing frequently.

- The Smouse R1 board is for use on the Smouse tool tip sensor.

- Origin: US