- For Becker pumps with grease zerks, use only white lithium grease.
- For AXYZ CNC Router

Pressure mat safety systems are installed onto the floor around your AXYZ CNC Router. These are used to guard the operator/persons by stopping anyone entering the cutting zone. The pressure mat operates when pressure is applied to the mat surface. This result is the machine will stop (pause) until the zone is clear and the job will need to be re-started by the operator. The machine cannot be run while pressure is applied to the mat surface.
The pressure mat safety system can be installed around one side, two sides, three sides or all four sides of your AXYZ CNC Router.

Note: A2MC R.7 Control System and SmartConsole required

- Oil dripper to be used in conjunction with the oscillating knife option to ensure proper maintenance procedures are followed.

- The Unist Air Metering Screw is a replacement part for a Unist misting system.

The Universal 5Y pressure foot plays just as vital a role as the high capacity pressure foot. It has been specifically engineered to accept 2'' or 4'' diameter hoses and allows for manual adjustment of the ride height for faster material and tool setup often demanded in today's busy workplace.
This is ideal for use in situations where the material being processed may be damaged by a conventional pressure foot.
The Universal 5Y Pressure Foot can be easily set to ride just a short height above the material surface. Swarf extraction is highly efficient thanks to the unique internal cyclonic design.

• Single head machines require the left hand option
• Dual head machines require the right hand option
• The 5Y pressure foot can be used with both 2'' and 4'' diameter hoses.
• Longer stroke versions are available for machines with higher Z allowances. Please contact us for further information and manufacturing lead times for longer stroke versions of the 5Y pressure foot.

The bellows system provides an extremely efficient vacuum performance. The bellows completely enclose the tooling, virtually eliminating all vacuum leakage.
This assembled pressure foot bellow is to be used in conjunction with the old style pressure foot
Compatible with all 5Y Pressure Feet.

- The Universal Lexan Seal is used to optimize vacuum performance on systems that are not using nose riders or bellows.

- For AXYZ CNC Router only

- For AXYZ CNC Router only

- The universal adjustable nose riding system is designed to fit with high capacity pressure and is used to very precisely set the cutting depth of a tool. It is commonly used for v-grooving ACM materials but can be used where ever high precision depths are required.

- The ELTE PF Reducer Bushing is used specifically for 5 hp ELTE spindles. It enables the use of the bellows or nose rider options for the smaller spindles.

- This is a replacement blast gate for high capacity pressure feet.
- The Blast Gate allows you to adjust the amount of air going into the pressure foot depending on the application. It is used to replace damaged blast gates.

- The newly constructed Universal Pressure Foot Donut is now blind (top-down) mounted. Our new blind mount donut replaces the old bottom-up design and fits all AXYZ High Capacity and 5Y pressure feet.
The UHMW Pressure Foot Donut is for High Capacity Pressure Feet and 5Y Pressure Feet.
- It is made from Ultra High Molecular Weight Polyethylene and designed to be used with sensitive materials that are prone to scratching when phenolic donuts are used.

- Assembled Pressure Foot Bellow. The bellow system completely encloses tooling which reduces vacuum leakage resulting in increased chip collection.

- The bellows system provides an extremely efficient vacuum performance. The bellows completely enclose the tooling, virtually elimination all vacuum leakage.

The Pneumatic Air Cylinder 1'' Stroke is a replacement for the ones on the pressure feet (PFL-E-S-Z and PFR-E-S-Z). These must be replaced if the pressure foot has suffered a collision and the pistons are bent.

This is suitable for use with the original style pressure foot. Not for use with High Capacity or 5Y.

- For AXYZ CNC Router Machine

- This powerful pneumatically powered 9000 strokes per minute oscillating knife is compact and fast. It can knife cut very tough and thick materials.  
- The Oscillating Knife includes a regulator to adjust knife stroke and oscillation speed.

- This Saber Blade Cartridge has been specifically designed for the Trident Tangential knife unit.
- Saber Blades are especially useful for cutting very tough materials such as vinyl flooring and gasketing.

- Pizza wheel holder for AXYZ CNC Router

- The Creasing Wheel Post is the holder specifically designed for the Trident Series CNC Router (AXYZ). 
- Creasing wheels and axils are sold separately.

- The Mechanical Vinyl Knife is a precision drag knife that is generally used for pre-applied vinyl cutting.
- It features a precise down pressure adjustment and includes an adjustable depth knife holder and a 45° Roland Blade.

These are replaceable brush rings which clip into place on the swarf cones used on various manual and quick release (ATC) spindles on the original Pacer CNC Routers only. Used correctly, they will eliminate the scattering of swarf and dust by the cutter and they enhance the performance of the cyclonic extraction system to maintain a clean and tidy workplace.

The bearings are easily damaged during installation.