- Saber Blade for CNC Router 

- RS485 Modbus module for AXYZ CNC Router

- Replacement 3-pin stepper drive plug for AXYZ CNC routers.

- The 12VDC Solenoid - 5 Port valves are generally used for tool changers.

- Pulleys are a vital part to support the cnc router machine. There primary use is to support the movement of the Z plate.

- Origin: US

- Grease Nipples are added onto bearings to allow for proper greasing. Well greased bearings run better and smoother.
It is vital that you maintain your machine by regular greasing of the bearings and ball screws.

Grease Nipples (or fittings) can be damaged by getting plugged or simply broken off. Immediately replace damaged nipples as grease will be lost through the broken part.

- This sensor is fitted with a 3 pin Molex connector on approximately 2 m (6 ft) of cable.

- This is a replacement fan for Eurobox style control boxes. It includes the fan, bezel, and filter enclosure.

- For AXYZ CNC router using only

- Motor Overload Protectors are not used on the control panels but are installed on all contactors controlling pumps, drills, and other peripheral device motors. 
- These devices ensure that a motor does not overheat and start a fire; so it is vital the correct device is used and it is set properly.  Motor overload protectors are available in a number of sizes and “ranges”.
-The current range must be set to 25% higher than the rated motor current that is printed on the motor nameplate.
- Please note that if you are replacing an older contactor or overload to one of these new ones, both must be changed. 

- The bridge rectifier supplies the power to an AMC machine’s stepper drives.
- This version plugs into the connection board. If this part has failed there is no power to the stepper drives.
- A more powerful bridge rectifier is available if you have a multi head machine or you are having problems with this part failing frequently.

- This box cutter cartridge has been specifically designed for the Trident tangential knife unit.
- Trapezoid or “utility” knife blades are very inexpensive and this holder can be used on many materials very cost effectively.
- This device is commonly used to cut cardboard and similar materials.
- Origin: UK

- The Heavy Duty Pizza Wheel Knife features a rotary pizza cutter blade 4” in diameter.
- It is specifically designed for abrasive and soft or flexible materials such as gaskets and fiberglass foams and insulation.
- Origin: UK

- Rotary heavy duty pizza wheel knife core cutter 4'' in diameter.

- Only suitable for the heavy duty pizza wheel knife.
- Origin: UK

- Tool holder for AXYZ CNC Router