- Assembled Pressure Foot Bellow. The bellow system completely encloses tooling which reduces vacuum leakage resulting in increased chip collection.

- For AXYZ CNC Router Machine

- This powerful pneumatically powered 9000 strokes per minute oscillating knife is compact and fast. It can knife cut very tough and thick materials.  
- The Oscillating Knife includes a regulator to adjust knife stroke and oscillation speed.

- This Saber Blade Cartridge has been specifically designed for the Trident Tangential knife unit.
- Saber Blades are especially useful for cutting very tough materials such as vinyl flooring and gasketing.

- Pizza wheel holder for AXYZ CNC Router

- The Creasing Wheel Post is the holder specifically designed for the Trident Series CNC Router (AXYZ). 
- Creasing wheels and axils are sold separately.

- The Mechanical Vinyl Knife is a precision drag knife that is generally used for pre-applied vinyl cutting.
- It features a precise down pressure adjustment and includes an adjustable depth knife holder and a 45° Roland Blade.

These are replaceable brush rings which clip into place on the swarf cones used on various manual and quick release (ATC) spindles on the original Pacer CNC Routers only. Used correctly, they will eliminate the scattering of swarf and dust by the cutter and they enhance the performance of the cyclonic extraction system to maintain a clean and tidy workplace.

The bearings are easily damaged during installation. 

- The Holding Break is used to hold either a stepper or servo Z axis in place when the power is turned off.

- Inverters (also called Variable Frequency Drives or VFD) are generally used to power high speed spindles. However they are sometimes used to power other motors, especially pumps and blowers in single phase applications.

- Saber Blade for CNC Router 

-The Brush Donut can be fitted on the bottom of the high capacity pressure foot. The brush helps prevent scratching when machining very sensitive materials.

- The Vexta PK299F4.5 Stepper motor includes a 24 tooth pulley and terminated cables. Double stack motor with a holding torque exceeding 600 once-inches (4.3 N-m).

This motor is the most commonly used stepper motor for X and Y axis in all AXYZ stepper system router tables.

- Pneumatic Male Run Tee 1/8'' PT x 4 mm x 4 mm for AXYZ CNC Router

- Replacement 5-pin stepper drive plug for AXYZ CNC routers.

- Replacement 3-pin stepper drive plug for AXYZ CNC routers.

- The 12VDC Solenoid - 5 Port valves are generally used for tool changers.

- This sensor is fitted with a 3 pin Panduit header on approximately 2 m (6 ft) of cable.

- This sensor directly connects to sensor cabling.

- This sensor is fitted with a 3 pin Molex connector on approximately 100 mm (4 inches) of cable.

- The 3 Way Pneumatic Valve is generally used to control the machine’s pressure foot. There will be one valve for each pressure foot installed on the machine.

- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to THK Linear Bearings.

- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to Star Linear Bearings.