- Pizza wheel holder for AXYZ CNC Router

- The Creasing Wheel Post is the holder specifically designed for the Trident Series CNC Router (AXYZ). 
- Creasing wheels and axils are sold separately.

- The Mechanical Vinyl Knife is a precision drag knife that is generally used for pre-applied vinyl cutting.
- It features a precise down pressure adjustment and includes an adjustable depth knife holder and a 45° Roland Blade.

These are replaceable brush rings which clip into place on the swarf cones used on various manual and quick release (ATC) spindles on the original Pacer CNC Routers only. Used correctly, they will eliminate the scattering of swarf and dust by the cutter and they enhance the performance of the cyclonic extraction system to maintain a clean and tidy workplace.

The bearings are easily damaged during installation. 

- The Holding Break is used to hold either a stepper or servo Z axis in place when the power is turned off.

- Inverters (also called Variable Frequency Drives or VFD) are generally used to power high speed spindles. However they are sometimes used to power other motors, especially pumps and blowers in single phase applications.

- Saber Blade for CNC Router 

-The Brush Donut can be fitted on the bottom of the high capacity pressure foot. The brush helps prevent scratching when machining very sensitive materials.

- The Vexta PK299F4.5 Stepper motor includes a 24 tooth pulley and terminated cables. Double stack motor with a holding torque exceeding 600 once-inches (4.3 N-m).

This motor is the most commonly used stepper motor for X and Y axis in all AXYZ stepper system router tables.

- Pneumatic Male Run Tee 1/8'' PT x 4 mm x 4 mm for AXYZ CNC Router

- The A2MC Power Board supplies and distributes power to the machine’s motor drives. It is a UL certified device that can power up to 8 motor drives. The nominal operating voltage is 65 VDC.

Please note: Fuses are not included.

- Replacement 5-pin stepper drive plug for AXYZ CNC routers.

- This sensor is fitted with a 3 pin Panduit header on approximately 2 m (6 ft) of cable.

- This sensor directly connects to sensor cabling.

- The 3 Way Pneumatic Valve is generally used to control the machine’s pressure foot. There will be one valve for each pressure foot installed on the machine.

- For AXYZ CNC Router

- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to THK Linear Bearings.

- This adapter can be fitted to a standard grease gun (not supplied) and is used to apply grease to Star Linear Bearings.

- Standard length (6.625') tool cups for a 7G or 21G ATC system

- Replacement for the pneumatic plunger for 7G/21G ATC for when it is broken or stuck up or down.
- This SKU, 050491, has a product number that starts with 'NCMB125' on the product label. Please be sure to correctly identify this prior to ordering.

- The AMC connection board provides power to the machine’s drives, makes the connections to the drives and sensors, as well as providing power to the AMC itself.

- The AMC Flash Board fits on either AMC004G or AMC004H AMC controllers. This device holds both the operating system and the jobs on 4 Mbytes of memory.
- The availability of parts for these legacy systems is dwindling rapidly. While the AMC has proved to be a reliable component, the time to replace the control system is now. AXYZ can upgrade the majority of CNC machines to the latest A2MC controller which will bring you all the benefits of improved performance and advanced features. 

- For AXYZ CNC router using only